Fixed Antenna Replacement

REMOVAL PROCEDURE
1. Remove the rear compartment trim.
2. Remove the antenna mast.
3. Disconnect the coaxial lead (4) from the antenna assembly (3).
4. Remove the antenna ground lead bolt (7).
5. Remove the antenna bracket bolt (6).
6. Remove the antenna assembly (3).
7. Remove the bezel (2) from the quarter panel.

INSTALLATION PROCEDURE
1. Apply a lubricant to the bezel (2).
2. Install the bezel to the quarter panel.
3. Install the antenna assembly (3).

NOTICE: Refer to Fastener Notice in Cautions and Notices.

4. Install the antenna bracket bolt (6).

Tighten
Tighten the bolt to 7.5 N.m (66 lb in).

5. Install the antenna ground lead bolt (7).

Tighten
Tighten the bolt to 7.5 N.m (66 lb in).

6. Connect the coaxial lead (4) to the antenna assembly.
7. Install the antenna mast.
8. Install the rear compartment trim.