Crankshaft Balancer Removal

^ Tools Required
- J37096 Flywheel Holding Tool
- J38197 Crankshaft Balancer Puller
1. Use J37096 to hold the flywheel.





2. Remove the crankshaft balancer bolt.





3. Use the J38197 to remove the crankshaft balancer.

IMPORTANT: Do not separate the crankshaft pulley from the crankshaft balancer. Service the crankshaft pulley and the crankshaft balancer as an assembly.

3.1. Invert J38197-2 so the leg of the tool is facing away from the crankshaft balancer.
3.2. Install the silver screws J38197-4 to the crankshaft balancer.
3.3. Turn J38197-1 to remove the crankshaft balancer from the crankshaft.
3.4. Remove J38197-1, J38197-2, and J38197-4 from the crankshaft balancer.