Park/Turn Signal Lamp Replacement

REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the bolts (3) that retain the park/turn signal lamp (2) to the impact bar (1).
3. Remove the electrical bulb/socket from the park/turn signal lamp (2).
4. Remove the park/turn signal lamp (2).

INSTALLATION PROCEDURE
1. Install the electrical bulb/socket into the park/turn signal lamp (2).
2. Install the park/turn signal lamp (2).
3. Install the bolts (3) in order to retain the park/turn signal lamp (2) to the impact bar (1).
4. Lower the vehicle.