Underhood Lamp: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the underhood lamp connector.
2. Remove the bolts that retain the underhood lamp (1) to the hood.
3. Remove the underhood lamp (1).

INSTALLATION PROCEDURE
1. Connect the connector to the underhood lamp (1).
2. Install the underhood lamp (1).

NOTICE: Refer to Fastener Notice in Cautions and Notices.

3. Install the bolts in order to retain the underhood lamp (1) to the hood.

Tighten
Tighten the bolts to 3 N.m (27 lb in).