Blower Control Module

Remove or Disconnect

1. Negative battery cable.
2. Rear engine sight shield. Refer to Engine Cover Replacement Service and Repair.
3. Positive booster cable from multi-use relay center.
4. Position underhood fuse block out of the way.
5. Electrical connectors from blower control module.
6. Blower control module from blower module.

Install or Connect

1. Blower control module to blower module.
2. Electrical connectors to blower control module.
3. Reposition underhood fuse block to original position.
4. Positive booster cable to multi-use relay center.
5. Rear engine sight shield. Refer to Engine Cover Replacement Service and Repair.
6. Negative battery cable.

Tighten
- Negative battery cable to 13 N.m (11 lb. ft.).