Knee Bolster Bracket Replacement - Left

REMOVAL PROCEDURE
1. Remove the knee bolster.
2. Remove the IP driver knee bolster deflector.
3. Remove the fasteners (4) securing the knee bolster bracket (1).
Remove the bracket (1).

INSTALLATION PROCEDURE
1. Install the knee bolster bracket (1).

NOTICE: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (4).

Tighten
Tighten the knee bolster bracket fasteners to 9.5 N.m (84 lb in).

3. Install the IP driver knee bolster deflector.
4. Install the knee bolster.