Shift Interlock: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the lever handle assembly from the shifter.
3. Disassemble the console, as needed, in order to access the shift control assembly.
4. Remove the park lock cable from the shift control assembly.
5. Remove the shift control cable from the shift control assembly.
6. Disconnect the electrical connectors.
7. Remove the shift control assembly.
8. Remove the shift interlock solenoid assembly from the control assembly.

INSTALLATION PROCEDURE
1. Install the shift interlock solenoid assembly.
2. Install the shift control assembly-to-floor console bracket.
^ Tighten the mounting nuts to 24 Nm (18 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

3. Connect the electrical connectors.
4. Install the shift control cable.
5. Install the park lock cable.
6. Assemble the console.
7. Install the lever handle assembly.
8. Connect the negative battery cable.