Park Switch Operation

REMOVAL PROCEDURE
1. Remove the wiper motor.

IMPORTANT: If the wiper motor is in the park position, operate the wiper motor as required to remove the pawl from the relay slot.

2. Remove the wiper motor cover.
3. Remove the screw and the park switch.

INSTALLATION PROCEDURE

NOTICE: Refer to Fastener Notice in Cautions and Notices.

1. Install the new park switch and the screw.
2. Operate the wiper motor back into the park position (paw in the relay slot).
3. Install the wiper motor cover.
4. Install the wiper motor.