U1161 DDM Loss of PASS Door Module Simple Bus Serial Data

DTC DDM U1161: Loss Of Passenger Door Module Simple Bus Serial Data:

DTC DDM U1161: Loss Of Passenger Door Module Simple Bus Serial Data:

CIRCUIT DESCRIPTION
The Simple Bus Interface (CKT 217 LT BLU) provides a communications path from both the Passenger and Rear Door Modules (PDM & RDM) and the Power Door Lock Switch to the Driver Door Module. The Driver Door Module (DDM) contains both Class 2 and Simple Bus Interface circuits allowing it to relay messages between the Class 2 Bus and the Simple Bus Interface (SBI).

CONDITIONS FOR SETTING THE DTC
^ Any Simple Bus Interface communications problem between the Passenger Door Module and Driver Door Module will cause this DTC to be set.
^ DTCs B1982 (Battery Voltage High) and B1983 (Battery Voltage Low) must not be current or the diagnostic will not run.

ACTION TAKEN WHEN THE DTC SETS
Loss of the Simple Bus Interface will cause the Passenger Door Module to Go to "Sleep". All power functions will be lost on the Passenger Door. This includes power windows and power door locks. The manual door lock and the key lock will still function normally.

CONDITIONS FOR CLEARING THE MIL/DTC
This code will clear automatically when the Simple Bus Interface becomes operational again.