Instrument Panel Assembly From IP Carrier

INSPECT: After a non-deployment accident, visually inspect the instrument panel assembly for damage or deformation. Any visible damage would indicate structural damage and therefore mandate IP assembly replacement.

REMOVE OR DISCONNECT
Disable SIR system.

1. Left and right sound insulators.
2. IP end caps.
3. IP accessory trim plates.
4. Left IP trim plate.
5. Right IP trim plate.
6. Lower IP.
7. Lower steering column.
Important: Place protective cloth on steering column to protect column from scratches.

8. IP assembly fasteners.
9. Pull IP assembly rearward slightly.
10. Electrical connectors.
11. IP assembly.

INSTALL OR CONNECT
1. IP assembly.
2. Electrical connectors.
3. IP assembly fasteners.

Tighten
Fasteners to 10 Nm (89 lb in).

4. Steering column.
5. Lower IP
6. Instrument panel trim plates and IP accessory trim plates.
7. End caps.
8. Left and right sound insulators.
^ Enable SIR system.