Valve Rocker Arm and Push Rod Installation
Tools Required
^ J 36660 Torque Angle Meter
1. Install the push rods.
2. Install the push rod guide plates.
3. Install the valve rocker arms.
Notice: Refer to Permanently Stretching Bolt Notice in Service Precautions.
4. Apply GM P/N 12345493 threadlocker or equivalent to the valve rocker arm bolt threads.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the valve rocker arm bolts.
Tighten the valve rocker arm bolts to 15 Nm (11 ft. lbs.) + 90 degrees using J 36660.