Left

Removal Procedure

Notice: Install the fasteners in to the same location that they were removed from. Make note of the positions that the fasteners are in before removal, as improper installation of the fasteners may lead to possible accelerator pedal or brake pedal binding.

1. Disable the SIR system.
2. Remove the left sound insulator fasteners (1) from the IP.
3. Disconnect the following components:
^ The courtesy lamp
^ The DSIR connector
^ The DTM sensor connector
4. Remove the left sound insulator (2).

Installation Procedure

1. Position the left sound insulator (2) to the IP.
2. Connect the following components to the insulator:
^ The courtesy lamp
^ The DSIR connector
^ The DTM sensor connector
3. Install the fasteners (1) to the IP.

Tighten
Tighten the fasteners to 1.9 Nm (17 lb in).

4. Enable the SIR system.