Instrument Panel Assembly Replacement

IP To Body Connector:

IP To Body Connections - Passenger Side:

IP To Body Connections - Left Side:

Ip Carrier To Body Fasteners ( Left Side Shown Right Side Similar):

INSPECT: After a non-deployment accident, visually inspect the instrument panel assembly for damage or deformation. Any visible damage would indicate structural damage and therefore mandate IP assembly replacement.

REMOVE OR DISCONNECT
Disable SIR system.

1. Left and right sound insulators.
2. IP end caps.
3. IP accessory trim plates.
4. Left IP trim plate.
5. Right IP trim plate.
6. Lower IP
7. Steering column.
8. IP carrier fasteners to A pillar.
9. IP carrier to Cowl fasteners.
10. Pull IP assembly rearward slightly.
11. Electrical connectors.
12. IP assembly.

INSTALL OR CONNECT
1. IP assembly.
2. Electrical connectors.
3. IP assembly to cowl fasteners.
4. IP assembly to A pillar fasteners.

Tighten
Fasteners to 10 Nm (89 lb in)

5. Steering column.
7. Instrument panel trim plates and IP accessory trim plates.
8. End caps.
9. Left and right sound insulators.
^ Enable SIR system.