Cornering Lamps

When the ignition switch is in RUN and with the turn signal/hazard switch in a turn position. battery positive voltage (B+) is applied from the underhood junction block T/SIG Fuse through the turn signal/hazard switch to the respective cornering lamp. Battery positive voltage (B+) is supplied via CKT 57 (ORN) to the LH cornering lamp and it is permanently grounded to G106. battery positive voltage (B+) is supplied via CKT 58 (BLK) to the RH cornering lamp and it is permanently grounded to G106. When the turn signal/hazard switch is in either the LEFT TURN or RIGHT TURN position, the corresponding lamp light.