Fuse Block: Service and Repair

HVAC Programmer:

REMOVE OR DISCONNECT
1. Right sound insulator.
2. Two fasteners from relay/fuse center at lower IP.
3. One fastener from the forward side of the IP carrier above relay/fuse center.
4. Disengage cam locks securing harness connectors to relay/fuse center.(Pull down on tabs) There are four cam locks, two are from the bottom and two are from the top.
5. Relay/fuse center from IP.

INSTALL OR CONNECT
1. Align relay/fuse center to lower IP.
2. Secure harness connectors to center and engage cam locks.
3. Fasteners to IP
4. Right sound insulator.