Water Deflector

Remove or Disconnect





1. Remove the door trim panel.
2. Remove the trim panel bracket (1).
3. Remove the 2 retaining fasteners at the outer top edge of the inner doors.





4. Remove the water deflector (1) by peeling the deflector off the door inner panel.

Installation Procedure

1. Install the water deflector (1) over the inside handle.
2. Align the water deflector with the top of the inner door panel. Apply pressure in order to hold the deflector into position.
3. Install the wire harness through the slits in the water deflector.
4. Insert the extruded pockets as needed. Remove any wrinkles.
5. Secure the bottom center. Work forward and up.
6. Return to the bottom center. Work the seal rearward and up.
7. Install the 2 retaining fasteners at the outer top edge of the inner door in order to secure the top edge of the water deflector to the door.
8. Install the trim panel bracket (1).
9. Install the 3 fasteners.

Tighten
Tighten the 3 fasteners to 9 N.m (80 lb in).

10. Install the trim panel.