Pass-Key(R) III System Auto Learn Procedure

Use this procedure when replacing the PASS-Key� III module, ignition lock cylinder, steering column assembly, PCM, or lost ignition keys.
1. Insert a valid mechanical coded unlearned ignition key into the ignition lock cylinder and turn the ignition switch to the RUN position. The SECURITY indicator illuminates for the length of the auto learn timer (10 minutes).
2. When the auto learn timer expires (the SECURITY indicator turns off) turn the ignition switch to OFF and remove the key.
3. Wait 10 seconds.
4. Repeat steps 1-3 two more times (for a total of thirty minutes).
5. Insert the newly learned key into the ignition lock cylinder and turn the ignition switch to the RUN position. The SECURITY indicator remains off indicating the new ignition key was learned.

Important
For learning up to 10 additional ignition keys, refer to the PASS-Key(R) III System Quick Learn Procedure in this section.