Headlamp: Service and Repair

Headlamp Assembly:

Headlamp Bulb/sockets:

REMOVE OR DISCONNECT
1. Open the hood.
2. Thumb screws retaining the headlamp to the headlamp bracket.
3. Pull the headlamp forward to disengage the rear retaining pin.
4. Headlamp from the vehicle.
5. Electrical connectors.
6. Headlamp bulbs by turning counterclockwise.

INSTALL OR CONNECT
1. Headlamp bulbs by turning clockwise.
2. Electrical connectors.
3. Headlamp to vehicle.
4. Press the headlamp rearward to engage the rear retaining pin.
5. Thumb screws to retain the headlamp to the headlamp bracket.
6. Close the hood.