A/C Compressor Hose

A/C Compressor Hose Retainer:

A/C Compressor Hose Condenser Connection:

A/C Compressor Hose Accumulator Connection:

A/C Compressor Hose Compressor Connection:

Tools Required:
J 38042 Dual O-Ring Joint Separator
J 39500 Air Conditioning Refrigerant Recovery, Recycling and Recharging (ACR4) System

Remove or Disconnect

1. Recover refrigerant from A/C system.
2. Negative battery cable.
3. Upper A/C compressor hose clip.
4. A/C compressor hose from accumulator.
5. A/C compressor hose condenser.
6. Electrical connector from A/C pressure sensor.
7. Nut attaching A/C compressor hose to A/C compressor.
8. A/C compressor hose from vehicle.

Install or Connect

1. A/C compressor hose to vehicle.
2. Nut attaching A/C compressor hose to A/C compressor.

Tighten
^ Nut to 30 N.m (22 lb ft).

3. Electrical connector to A/C pressure switch.
4. A/C compressor hose to condenser.

Tighten
^ Condenser connection to 24 N.m (18 lb ft).

5. A/C compressor hose to accumulator

Tighten
^ Accumulator connection to 24 N.m (18 lb ft).

6. Upper A/C compressor hose clip.
7. Negative battery cable.
8. Evacuate, charge and leak test A/C system.