Inlet Hose
REMOVAL PROCEDURETools Required
^ J 37097-A Heater Hose Clamp Tool
Caution: Refer to Battery Disconnect Caution in Service Precautions
1. Disconnect the negative battery cable.
2. Drain the coolant.
3. Remove the inlet radiator hose clamp from the radiator.
4. Remove the inlet radiator hose from the radiator.
5. Remove the inlet radiator hose clamp from the engine.
6. Remove the inlet radiator hose from the engine.
INSTALLATION PROCEDURE
Tools Required
^ J 37097-A Heater Hose Clamp Tool
1. Install the inlet radiator hose to the engine.
2. Install the inlet radiator hose clamp to the engine.
3. Install the inlet radiator hose to the radiator.
4. Install the inlet radiator hose clamp to the radiator.
5. Fill the cooling system.
6. Start the engine and checks for leaks.