Accumulator Assembly, 2-1 Band Servo Disassemble

1. Remove the four indicated accumulator cover bolts (131) from the 1-2 and 2-3 accumulator cover (1132).
2. Remove the three indicated bolts (103) from the manual 2-1 band servo cover (104).





3. Use a large screwdriver in order to gently pry the lube oil pipe retainer (129) from the case.
4. Remove the lube oil pipe (130) from the front differential carrier internal gear lube hole.





5. Remove both the 1-2 and 2-3 accumulator assembly (132-140) and the manual 2-1 band servo assembly (106-116) out of the case at the same time.
6. Remove the pipe assembly (124-126). Be careful not to twist the pipe assembly.
7. Remove the cover gasket from the manual 2-1 band servo.