Automatic Door Lock Relock

The Body Control Module (BCM) locks the doors when these conditions are met:
1. Automatic door lock/unlock is in mode 2, 3 or 4. Refer to Feature Customization for more information. Description and Operation
2. All vehicle doors are closed (open signal in circuits 49 and 727).
3. The ignition switch is in the RUN position.
4. Transaxle is shifted out of PARK or NEUTRAL by sensing a transaxle range PRNDL signal via the Class II serial data link.
5. Press unlock on either door lock switch.
6. Open a vehicle door (ground signal in circuit 49 or 727).
7. Close all vehicle doors (open signal in circuits 49 and 727).