Power Steering Pump Pulley Replacement

^ Tools Required:
- J 25034-B Power Steering Pump Pulley Remover (Base ONLY)
- J 37609 Screw
- J 25033-B Power Steering Pump Pulley Installer Remover
OR
- J 37609-A Power Steering Pump Pulley
- J 36015 Power Steering Pump Pulley Installer
- Or Equivalents

REMOVE OR DISCONNECT
1. Drive belt.
2. Pump from engine for clearance.
3. Pump pulley using J 25034-B (Base ONLY) with J 37609 or J 37609-A.

INSTALL OR CONNECT
1. Pump pulley using J 25033-B or J 36015.

Important:
^ Face of pulley hub must be flush with end of pump driveshaft.
^ Do not use a press to install pulley.

2. Pump to engine.
3. Accessory drive belt.
4. Bleed power Steering system.
^ Inspect for leaks.