Accumulator Components Assemble

1. Inspect the accumulator housing (140), the spacer plate assembly (134) and cover (132) for the following conditions:
^ Damaged lube and servo oil pipe holes in the accumulator cover
^ Damaged, improperly machined or porous accumulator cover
^ Bent or damaged accumulator spacer plate
^ Damaged accumulator cover gaskets
^ Stripped or damaged bolt holes in the accumulator housing
^ Damaged, worn, improperly machined or porous accumulator housing
^ Leaking, loose or missing cup plugs in the accumulator housing





2. Inspect the accumulator pistons (136A/B), springs (138, 139, 142, 143), seals (137A/B), and pins (135A/B) for the following conditions:
^ Broken or collapsed piston springs (inner and outer)
^ Broken or collapsed piston cushion springs
^ Bent or worn accumulator piston pins
^ Damaged, worn or porous accumulator pistons
^ Damaged accumulator piston seals





3. Inspect the servo and lube oil pipe components (124-130) and the 2-1 manual band servo cover (104) for the following conditions:
^ Damaged lube, and servo oil pipe holes in the servo cover
^ Damaged, improperly machined or porous servo cover
^ Bent, plugged or damaged lube and servo oil pipes
^ Plugged or damaged lube oil hose
^ Damaged hose clamps
^ Damaged lube oil pipe retainer
^ Missing lube oil pipe washer





4. Install the 2-3 accumulator piston oil sea[ ring (137B) onto the 2-3 accumulator piston (136B). Lubricate the oil seal ring with automatic transmission fluid.
5. Assemble the 2-3 accumulator piston pin (135B) and piston (136B).
6. Assemble the 2-3 accumulator piston springs (138, 143) and piston assembly (136B) into the accumulator housing (140).





7. Install the 1-2 accumulator piston oil seal ring (137A) onto the 1-2 accumulator piston (136A). Lubricate the oil seal ring with automatic transmission fluid.
8. Assemble the 1-2 accumulator piston pin (135A) and piston (136A).
9. Assemble the 1-2 accumulator piston springs (139, 142) and the piston assembly (136A) into the accumulator housing (140).





10. Assemble the accumulator spacer plate assembly (134) and cover (132) onto the accumulator housing (140).
11. Install seven accumulator cover bolts (131).
^ Torque to 11 Nm (97 inch lbs.).





12. Assemble the lube oil pipe (126), hose (128), hose clamps (127), pipe retainer (129) and pipe with washer (130).
13. Assemble the 2-1 manual band servo and forward band servo oil pipes (124, 125) into the accumulator assembly (140).
14. Assemble the 2-1 manual band servo and forward band servo oil pipes (124, 125) into the 2-1 manual band servo cover (104).
15. Install the lube oil pipe assembly (126-130) into the accumulator assembly (131-140).