Shift Control Replacement

REMOVAL PROCEDURE





1. Remove the front floor console. Refer to Console Replacement-Front Floor in Instrument Panel, Gauges and Warning Indicators.
2. Remove the console wiring harness.





3. Remove the console shift control wiring harness.
4. Remove the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (At Console Shift Control).
5. Remove the park/lock cable. Refer to Park Lock Cable Replacement.





6. Remove the console shift control nuts.
7. Remove the console shift control.

INSTALLATION PROCEDURE





1. Install the console shift control.
2. Install the console shift control nuts.
^ Tighten the console shift control nuts to 24 Nm (18 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

3. Install the park/lock cable. Refer to Park Lock Cable Replacement.
4. Install the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (At Console Shift Control).





5. Install the console shift control wiring harness.





6. Install the console wiring harness.
7. Install the front floor console. Refer to Console Replacement-Front Floor in Instrument Panel, Gauges and Warning Indicators.