Front Door: Service and Repair

TRIM PANEL
Front Door - Coupe and Sedan

REMOVAL PROCEDURE

TOOLS REQUIRED
J 38778 Door Trim Pad and Garnish Remover




1. Remove the power window switch (3) and remote rearview mirror switch.
2. Remove the cover in the armrest pull cup.
3. Remove the armrest pull cup screws.




4. Starting at the door bottom, use the J 38778 to release the door trim panel retainers.
5. Lift the trim panel up to release the top edge and remove it from the door.

INSTALLATION PROCEDURE

IMPORTANT: Before installing the door trim panel to the door, discard the old trim panel retainers. Use new trim panel retainers in order to properly secure the trim panel to the door.




1. Install the new trim panel retainers to the trim panel.
2. Connect the electrical connectors as needed.
3. Position the top of the trim panel at the window opening and press down.
4. Align the fasteners into the holes in the door metal.
5. Press on the trim panel in order to secure the fasteners into the door.

NOTE: Refer to Fastener Notice in Cautions and Notices.




6. Install the armrest pull cup screws.

Tighten
Tighten the armrest pull cup screws to 2 Nm (18 lb in).

7. Install the cover over the pull cup screws.
8. Install the power window switch.