Inlet Hose

REMOVAL PROCEDURE

^ Tools Required
- J 38185 Hose Clamp Pliers





1. Partially drain the cooling system.
2. Remove the left diagonal brace.
3. Use the J 38185 in order to reposition the hose clamp at the radiator.
4. Disconnect the inlet hose from the radiator.





5. Use the J 38185 in order to reposition the hose clamp at the thermostat housing.
6. Disconnect the inlet hose from the thermostat housing. Remove the inlet hose.

INSTALLATION PROCEDURE





1. Align the marks on the hose. Install the inlet hose.
2. Use the J 38185 in order to reposition and install the inlet hose clamp at the thermostat housing.





3. Connect the inlet hose to the radiator.
4. Use the J 38185 in order to reposition and install the hose clamp at the radiator.
5. Install the left diagonal brace.
6. Fill the cooling system with engine coolant.
7. Inspect for leaks.