Forward Band Servo Assemble

1. Inspect the forward band servo components for the following conditions:
^ A damaged, worn, or porous servo piston
^ A damaged servo piston seal
^ A damaged, worn, or porous servo cover
^ A damaged servo cover seal
^ A broken or collapsed servo piston spring
^ A broken or collapsed servo piston cushion spring
^ A damaged or worn servo piston pin





2. Install the servo piston cushion spring retainer (17) into the servo piston, if necessary.
3. Assemble the servo piston (16), the servo piston cushion spring (19), the cushion spring retainer (20), and the servo piston pin (21).
4. Install the servo pin snap ring (15) into the servo piston pin (21).
5. Install the servo piston oil seal ring (18) into the servo piston (16).
6. Install the servo piston spring (22) into the servo assembly.





7. Position the transmission so that the oil pan is facing up.
8. Affix the servo cover seal (14) onto the servo cover (13).
9. Install the servo assembly (13-22) into the servo cover. Pivot the servo into the cover in order to prevent the piston seal from being damaged.
10. Install the servo and the cover assembly (13-22) into the case (3).





11. Using a long screwdriver, pry against the work bench in order to compress the forward band servo assembly (13).
12. Hold the servo assembly compressed.
13. Install the three forward band servo cover bolts (12).
^ Tighten the bolts to 10 Nm (89 inch lbs.).

14. Remove the long screwdriver.