Accumulator Components Disassemble

1. Remove the seven remaining accumulator cover bolts (131) from the accumulator assembly.
2. Disassemble the accumulator cover (132), and spacer plate assembly (134) from the accumulator housing assembly (140).
3. Disassemble the 1-2 and 2-3 accumulator pistons (136A/B), piston pins (135A/B), and inner, outer and cushion springs (138, 139, 142, 143, springs are model dependent) from the accumulator housing (140).
4. Remove the piston oil seal rings (137A/B) from the 1-2 and 2-3 accumulator pistons (136A/B).





5. Disassemble the 2-1 manual band servo and forward band servo oil pipes (124, 125), and the lube oil pipe assembly (126-130) from the accumulator cover (132) and the 2-1 manual band servo cover (104).
6. Disassemble the lube oil pipe (126), the hose clamps (127), the hose (128), the lube oil pipe retainer (129) and the lube oil pipe with the washer (130).