4T65-E Automatic Transaxle

REMOVAL PROCEDURE





1. Raise and support the vehicle.
2. Remove the torque converter cover(s). Refer to Torque Converter Cover Replacement.
3. Remove the flywheel to torque converter bolt(s).

INSTALLATION PROCEDURE





1. Install the flywheel to torque converter bolt(s).
^ Tighten the flywheel to torque converter bolt(s) to 63 Nm (47 lb ft).

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the torque converter cover(s). Refer to Torque Converter Cover Replacement.
3. Lower the vehicle.