Liquid Line (Orifice to Evaporator)

Refrigerant Line Connection To Cowl:

Refrigerant Lines And Routing:

Refrigerant Lines To Compressor:

Remove or Disconnect

1. Air cleaner and duct assembly.
2. Recover refrigerant.
3. Liquid line/suction line bracket.
4. Brake pressure modulator bracket.
5. Liquid line fitting at orifice.
6. Liquid line at block fitting.
7. Liquid line.

Important
^ Use care when removing tube.

8. O-rings.

Install or Connect

1. New O-ring seals coated with mineral base 525 viscosity refrigerant oil.
2. Liquid line into place.
3. Liquid line at block fitting.

Tighten
^ Bolt to 16 N.m (12 lb. ft.).

4. Liquid line fitting at orifice.

Tighten
^ Fitting to 27 N.m (20 lb. ft.).

5. Liquid line/suction line bracket.
6. Brake pressure modulator bracket.
7. Evacuate, charge and leak test system.
8. Air cleaner and duct assembly.