Steering Column (Ignition) Lock Cylinder

PASS-Key(R) II System Components:

PASS-Key(R) II Steering Column (Ignition) Lock Cylinder Wire Routing:

The steering column (ignition) lock cylinder used with the PASS-Key(R) II system contains a set of electrical terminals used to contact the resistor in the ignition key.

Important
^ The wire routing for the contacts inside the steering column is very critical. When servicing the lock cylinder, he certain to maintain proper wire routing..
^ When replacing a steering column lock cylinder, it is necessary to make new keys which match the PASS-Key(R) II key code of the PASS-Key(R) II system and the mechanical cut of the new steering column (ignition) lock cylinder