Timing Chain and Sprockets Installation

^ Tools Required
- J 36660 Torque Angle Meter





1. Install the timing chain on the sprockets, Align the timing marks.





2. Install the timing chain, the crankshaft sprocket, and the camshaft sprocket.

NOTICE: This bolt is designed to permanently stretch when tightened. The correct part number fastener must be used to replace this type of fastener. Do not use a bolt that is stronger in this application. If the correct bolt is not used, the parts will not be tightened correctly. The system or the components may be damaged.

3. Install the camshaft sprocket bolt.
^ Tighten the camshaft sprocket bolt to 100 Nm (74 ft. lbs.). Use J 36660 to tighten the camshaft sprocket bolt an additional 90°.

NOTICE: Refer to Fastener Notice in Service Precautions.





4. Install the timing chain dampener.