Exhaust System Hangers

The exhaust systems are supported by free-hanging rubber mountings which permit some movement of the exhaust system. The free-hanging rubber mountings do not permit transfer of noise and vibration into the passenger compartment.

Annoying rattles and noise vibrations in the exhaust system can be caused by misalignment of parts or retention of heat shields. When aligning the system, leave all of the bolts or nuts loose until all of the parts are properly aligned. Then, tighten them working from the front to the rear. Tighten them working form the front to the rear. Tighten them working from the front to the rear.

NOTICE: When jacking or lifting the vehicle from the frame side rails, be certain that the lift pads do not contact the catalytic converter. This may damage the converter.

Periodic maintenance of the exhaust system is not required; however, if the car is raised for other service, it is advisable to check the general condition of the catalytic converter, pipes, and mufflers.