Installation Procedure

Description:

1. Install the SDM (5) to the floor sheetmetal (4).
2. Install the SDM mounting fasteners (1).

NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.

Tighten
Tighten fasteners to 9 N.m (80 lb. in).

Description:

3. Install the SDM harness connector (2) to the SDM (1).

Description:

4. Install the Connector Position Assurance (CPA) (3) to the SDM harness (2) connector.
5. Install the sill plate (RH).
6. Install the passenger front seat.
7. Enable the SIR system. Refer to Enabling the SIR System.