Lower Control Valve Body and TFP Switch Install

^ Tools Required
- J 39630-2 Lower Control Valve Body and Gasket Guide Pins





1. Install the lower control valve body (903) over the J 39630-2. Then install the automatic transmission fluid pressure manual valve position switch (936).
2. Install some of the valve body bolts (938, 940, 941) and hand tighten them. Remove the guide pins and install the remaining valve body bolts including (534) on the channel plate side.
^ Tighten the bolts (938, 940, 941, 534) in a star pattern to 8-14 Nm (6-10 ft. lbs.).