A/T Range Selector Cable Replacement (Column Shift)

REMOVAL PROCEDURE
1. Remove the cable from the transmission.
2. Remove the left sound insulator and the knee bolster. Refer to Left Sound Insulator and Knee Bolster in Instrument Panel, Gauges and Warning Indicators.





3. Remove the cable retaining clip and the cable at the steering column.
4. Remove the cable assembly through the hole in the cowl.

INSTALLATION PROCEDURE
1. Properly route the cable. Position the cable.





2. Install the cable and the retaining clip at the steering column.
3. Install the left sound insulator and the knee bolster. Refer to Left Sound Insulator and Knee Bolster in Instrument Panel, Gauges and Warning Indicators.
4. Install the cable at the transaxle.
5. Adjust the cable. Refer to AT Range Selector Cable Adjustment