General Information

IMPORTANT
The Delayed Locking feature must be initially enabled with the scan tool to have access to this feature. The RFA module software for the feature is turned OFF on all new vehicles and service replacement parts. Use the procedure below to perform initial activation of Delayed Locking.
1. Connect scan tool.
2. Select vehicle being programmed.
3. Select Body.
4. Select RFA.
5. Select RFA Test.
6. Select Set Options.
7. Select Options 0.
^ Follow screen prompts and instructions.
^ During Step 8 use the EXIT key to change from one function screen to another. Do not use the YES or NO key's. If YES or NO is pressed other features may become disabled.
8. Scroll through screens until Delayed Locking is displayed, select Yes.
9. Exit system.
10. Disconnect scan tool.
11. Activate Delayed Locking feature by using the following procedure:
This feature allows the driver to delay the locking of the vehicle after the lock switch has been activated. Upon activating the lock switch with the driver's door open, a chime will sound to let the driver know that they are in the delayed locking mode. After all doors have been closed for 5 seconds they will lock automatically. Opening any door before the 5 seconds have elapsed will cause the timer to reset once all doors are again closed. This feature can be programmed on or off for each transmitter.