Coolant Recovery Reservoir Replacement

REMOVAL PROCEDURE





1. Remove the air inlet ducts.
2. Drain the coolant from the recovery reservoir. Refer to Draining and Filling Cooling System in Cooling System.
3. Disconnect the reservoir to radiator hose and clamps.





4. Remove the fasteners retaining the reservoir.
5. Remove the reservoir.

INSTALLATION PROCEDURE





1. Install the recovery reservoir in the vehicle.
2. Install the fasteners.





3. Connect the hoses and the clamps.
4. Refill the reservoir with coolant. Refer to Draining and Filling Cooling System in Cooling System.
5. Install the air inlet duct.