Radiator Surge Tank Replacement

REMOVAL PROCEDURE





1. Remove the air inlet ducts.
2. Drain the coolant from the surge tank. Refer to Draining and Filling Cooling System in Cooling System.





3. Disconnect the hoses and clamps.





4. Remove the fasteners retaining the reservoir.
5. Disconnect the low coolant level sensor electrical connector.
6. Remove the surge tank.

INSTALLATION PROCEDURE





1. Install the surge tank in position in the vehicle.
2. Connect the low coolant level sensor electrical connector.
3. Install the fasteners.





4. Connect the hoses and clamps to the surge tank.
5. Refill the surge tank with coolant. Refer to Draining and Filling Cooling System in Cooling System.
6. Install the air inlet duct assembly.