Remote Control Door Lock (RKE) Module

Module Mounting And Wiring: Typical:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Open rear compartment.
3. Left inner trim panel.
4. One electrical connector.
5. Remove push pins.
6. Remote control door lock receiver.

INSTALL OR CONNECT
1. Remote control door lock receiver to rear compartment brace.
2. Push pins to brace.
3. Electrical connector.
4. Rear compartment trim.
5. Close rear compartment.
6. Negative battery cable.
7. Reprogram new receiver to transmitter(s). Refer to Reprogramming Remote Control Door Lock Receiver To Transmitter.