Engine Mount Bracket Replacement

REMOVAL PROCEDURE





1. Disconnect the negative battery cable.

CAUTION: Refer to Safety Disconnect Caution in Service Precautions.

2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the engine mount strut. Refer to Engine Mount Strut
Replacement.
4. Remove the engine mount strut bracket bolts.
5. Remove the engine mount strut bracket.

INSTALLATION PROCEDURE





1. Install the engine mount strut bracket.
2. Install the engine mount strut bracket bolts.
^ Tighten the bolts on the front of the engine to 66 Nm (49 ft. lbs.) + 90 degrees.
^ Tighten the bolts on the bottom of the engine to 130 Nm (96 ft. lbs.).
Install the engine mount strut. Refer to Engine Mount Strut Replacement

NOTICE: Refer to Fastener Notice in Service Precautions.

3. Lower the vehicle.
4. Connect the negative battery cable.