Air Door: Service and Repair

Heater Module (1 Of 2):

Heater Module (2 Of 2):

Remove or Disconnect

1. Drain engine coolant.
2. Right and left sound insulators.
3. Console (if equipped).
4. Floor air outlet duct.
5. Raise vehicle.
6. Heater hoses at core.
7. Lower vehicle.
8. Heater core coven
9. Heater core.
10. Heater core shroud.
11. Defrost link.
12. Heater valve shaft.
13. Heater valve.
14. Cable to temperature valve.
15. Temperature valve clip.
16. Temperature valve.
17. Mode valve vacuum actuator.
18. Mode valve shaft.
19. Mode valve.
20. Defrost valve vacuum actuator.
21. Defrost valve shaft.
22. Defrost valve.

Install or Connect

1. Defrost valve.
2. Defrost valve shaft.
3. Defrost valve vacuum actuator.
4. Mode valve.
5. Mode valve shaft.
6. Mode valve vacuum actuator.
7. Temperature valve.
8. Temperature valve clip.
9. Cable to temperature valve.
10. Heater valve.
11. Heater valve shaft.
12. Defrost link.
13. Heater core shroud.

Tighten
^ Screws to 1.4 N.m (12 lb in).

14. Heater core.

Tighten
^ Screws to 1.4 N.m (12 lb in).

15. Heater core cover.

Tighten
^ Screws to 1.4 N.m (12 lb in).

16. Raise vehicle.
17. Heater hoses at core.
18. Lower vehicle.
19. Floor air outlet duct.

Tighten
^ Screws to 1 N.m (9 lb in).

20. Console (if equipped).
21. Right and left sound insulators.
22. Refill engine coolant.