Parking Lamp: Service and Repair

Park Switch Assembly Replacement

Wiper Motor Cover Assembly Replacement:

Wiper Motor Assembly Components:

REMOVE OR DISCONNECT
1. Wiper motor assembly. See "Wiper Motor Assembly Replacement." Service and Repair
2. Wiper motor cover assembly. See "Wiper Motor Cover Assembly Replacement." Service and Repair

IMPORTANT
^ If wiper motor (15) is in park position (Figure 16), operate wiper motor as required to remove pawl from relay slot.

3. Screw (21, Figure 20) and park switch assembly (22).

INSTALL OR CONNECT

NOTICE: Refer to Fastener Notice in General Information.

1. New park switch assembly (22) and screw (21).
2. Operate wiper motor (15) back into park position (pawl in relay slot).
3. Wiper motor cover assembly (14). Follow "Wiper Motor Cover Assembly Replacement" procedure carefully.
4. Wiper motor assembly. See "Wiper Motor Assembly Replacement."