Engine Oil: Service and Repair

REMOVAL PROCEDURE





1. Remove the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the oil pan bolt.
4. Remove the oil filter.

INSTALLATION PROCEDURE





1. Install the oil filter.
2. Install the oil pan drain bolt.
^ Tighten the oil pan drain bolt to 26 Nm (19 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

Lower the vehicle.

3. Fill the engine with oil to the appropriate mark.
4. Install negative battery cable.
5. Start engine and inspect for leaks.