Steering Wheel

Steering Wheel:

Steering Wheel:

^ Tool Required:
- J 1859-A Steering Wheel Puller
- Or Equivalent

REMOVE OR DISCONNECT
1. Disable Supplemental Inflatable Restraint (SIR) system.
2. Inflator module (2) 10 mm screws and electrical connection.
3. Negative battery cable.
4. Inflator Module and horn lead.
5. Retainer and nut.
6. Steering wheel using J 1859-A.

INSTALL OR CONNECT
1. Align mark on steering wheel with mark on shaft, then install steering wheel.
2. Nut.
^ Tighten steering wheel nut to 41 Nm (30 lb ft).
3. Retainer.
4. Inflator Module and horn lead.
Tighten inflator to steering wheel screws to 10 Nm (89 lb in).