Oil Level Sensor: Service and Repair

REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
3. Drain the engine oil.
4. Disconnect the electrical connector from the Engine Oil Level Switch.
5. Remove the Engine Oil Level Switch from the oil pan.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

1. Install the Engine Oil Level Switch.

Tighten
Tighten the switch to 17-27 N.m (13-2O lb ft).

2. Connect the electrical connector.
3. Lower the vehicle.
4. Add engine oil to the correct level.