Horn Switch: Service and Repair

REMOVAL PROCEDURE





1. Disable the SIR system.
2. Remove the inflatable restraint steering wheel module.
3. Disconnect the horn wiring connector from the steering column
4. Remove the horn switch retaining bolts (5) from the horn switch (3).
5. Remove the horn switch (3) from the steering wheel (6).

INSTALLATION PROCEDURE





1. Position the horn switch (3) to the steering wheel (6).

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Connect the horn wiring connector to the steering column
3. Install the horn switch retaining bolts (5) to the horn switch (3).
^ Tighten the horn switch retaining bolts to 6 Nm (53 inch lbs.).

4. Install the inflatable restraint steering wheel module.
5. Enable the SIR system.