Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 1999 >> Century V6-3100 3.1L VIN M SFI >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Repair Instructions >> 83. Driven Sprocket Support Components Assemble

83. Driven Sprocket Support Components Assemble

- Tools Required
- J 4670-01 Clutch Spring Compressor





1. Use transmission fluid in order to lubricate a new outer seal (604) for the fourth clutch piston (603). Affix the seal to the piston.





2. Use transmission fluid in order to lubricate a new inner seal (605) for the fourth clutch piston. Affix the seal to the driven sprocket support hub.





3. Insert the fourth clutch piston assembly (603) into the driven sprocket support (609) and align as shown.
4. Insert the fourth clutch spring assembly (602) into the piston.





5. Use J 4670-01 in order to install the fourth clutch spring snap ring (601).





6. Install the second clutch housing four lobed ring seals (612) onto the driven sprocket support hub (609).
7. If you are installing new second clutch housing oil seal rings (613), lubricate the rings. install the oil seal rings (613) onto the driven sprocket support hub (609).
pro multis · About Operation CHARM