Amplifier Replacement

REMOVAL PROCEDURE
1. Remove the rear window trim panel.
2. Disconnect the electrical connector(s).
3. Remove the 4 amplifier bracket fasteners (1, 2) from the rear shelf.
4. Remove the amplifier.

INSTALLATION PROCEDURE
1. Install the amplifier.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the amplifier assembly to the rear shelf with the 4 bolts (1, 2).

Tighten
Tighten the amplifier bracket retaining bolts to 7 N.m (62 lb ft).

3. Connect the electrical connector(s).
4. Install the rear window trim panel.